Collar-Based Downhole Logger

RECON™ CB1™ downhole tool: increasing your intelligence spectrum

The RECON CB1 is a collar-based high-density data logging tool that captures high-resolution data to provide the most accurate picture of the drilling environment to allow you to zoom in and see everything, including torque, weight-on-bit and internal and external pressure. As in the case of the MK1, you can use this for environmental measurements, support information for equipment research and development activities and optimization of your drilling procedures and practises.

High Capacity.

[ Development Target ]
  • Data Storage Capacity: 8,193 MB
  • Secondary Backup Data Storage: 32 MB
  • Dual Batteries: Efficient BMS to maximize battery life
  • Battery Life: >400 hours (may vary with configuration)
  • Raw data stored at 500 Hz

Intelligence Spectrum.

[ Development Target ]
  • 3-axis low-rate acceleration ±16g at 12Hz
  • Force measurement -10,000 to 50,000 lbf at 500Hz (5.25 inch size)
  • Torque measurement -5,000 to 25,000 lbf·ft at 500Hz (5.25 inch size)
  • Directional bending measurement (TBD)
  • Internal Pressure 15,000psi at 500Hz
  • External Pressure 25,000psi at 500Hz
  • Temperature -40°C to 150°C

Intuitive Reporting with Gateway.

  • Instant On-Site Automatic Report Generation
  • Statistical Analysis
  • Inclination Calculations
  • Expert Review
  • Data Analysis Service

The solution for BHA monitoring

  • On-site summary report, generated in seconds, to make fast decision on operational parameters for subsequent runs.
  • Near-bit high-fidelity environmental data collection for increasing efficiency on subsequent operations and drilling optimization without affecting the bottom hole assembly (BHA) design.
  • Logging for preventive maintenance of equipment used in harsh environments.
  • Data collection for field trials of new tools during research and development when high frequency environmental data is not available from the R&D tool.

Reliable Downhole Drilling Software

All RECON come with their own tool configuration and instant report generation software.

Gateway™ Drilling Software

Gateway is your portal to configure and manage the collected data from all RECON devices.

Artemis™ Data Software

Artemis is your window into data analysis and visualization.

Recon Downhole Data Loggers


The RECON MK1 is a miniature high-density data logging tool that captures high-resolution data to provide the most accurate picture of the drilling environment.


The RECON TR1 is a tiny logging tool that captures statistical and burst environmental data to provide a high quality overview of the drilling environment.


The RECON LT1 is a tiny indicator that can measure the use of equipment for preventative maintenance schedules.


The RECON CB1 measures all the high-density parameters of the MK1 and, because it is collar-based, it also records force, torque and pressure.