RECON™ CB1™

Capturing High Resolution Data

INCREASING YOUR INTELLIGENCE SPECTRUM

The RECON CB1 is a collar-based data logging tool that captures high-resolution data to provide an accurate picture of the drilling environment. CB1 measures the forces affecting your drilling performance including torque, weight-on-bit and internal and external pressure.

CB1 is designed for modular integration with the RECON MK1 for additional vibration and rotational measurements.

The CB1 is used for environmental measurements, support for equipment research and development activities and optimization of your drilling procedures and practises.

High Capacity

  • Data storage capacity: 8,192 MB
  • Secondary backup data storage: 32 MB
  • Dual batteries: Efficient BMS to maximize battery life
  • Total battery life (dual battery): >400 hours (may vary with configuration)
  • Raw data stored at 500 Hz

Intelligence Spectrum

  • 3-axis low-rate acceleration ±16 g at 12 Hz
  • Force measurement at 500 Hz (size dependent)
  • Torque measurement at 500 Hz (size dependent)
  • Directional bending measurement
  • Internal pressure 15,000 psi at 500 Hz
  • External pressure 15,000 psi at 500 Hz
  • Temperature -40°C to 150°C

Intuitive Reporting with Gateway™

  • Instant on-site automatic report generation
  • Statistical analysis
  • Inclination calculations
  • Expert review
  • Data analysis service
  • Data sync between CB1 and MK1

The solution for BHA monitoring

With the RECON CB1, you get…

 

  • ON-SITE SUMMARY REPORT
    generated in seconds, to make fast decision on operational parameters for subsequent runs.
  • NEAR-BIT HIGH-FIDELITY ENVIRONMENTAL DATA COLLECTION
    for increasing efficiency on subsequent operations and drilling optimization without affecting the bottom hole assembly (BHA) design.
  • LOGGING FOR PREVENTATIVE MAINTENANCE
    of equipment used in harsh environments.
  • DATA COLLECTION FOR FIELD TRIALS
    of new tools during research and development when high frequency environmental data is not available from the R&D tool.

Ready to Deploy

Field kit comes with everything you need to use the CB1 including spare parts, lubricants, and seals.

The CB1 is designed with installation and use flexibility in mind. Install in the shop prior to shipment to field, or on the rig site.

 

Feature Highlight: Battery Life Conservation

The CB1 can be set to wake and sleep modes under various conditions to conserve battery life and limit logging to only essential moments – even between subsequent runs.

FIND OUT MORE

MK1 LOGGER

Make better decisions, fast. With the RECON™MK1™ Logger you get near-bit high-fidelity environmental data collection, and more importantly, increased efficiency on subsequent operations and drilling optimizations without affecting BHA design. 

TR1 LOGGER

The RECON™TR1™ Logger is the best kept secret in the world of equipment use tracking. Designed with the equipment rental industry in mind, the TR1 gives you the data you need to accurately charge each customer for the time used, and more importantly, for any damage caused to your high-performance equipment.

LT1 INDICATOR

RECON™LT1™ is the solution for asset tracking. Designed with in-tool environmental data collection for tracking usage on equipment, you can see when a tool needs to be serviced via visual indicator. Logging for preventative maintenance of equipment used in the harshest of environments has never been this easy.

CB1 TOOL

Increase your intelligence spectrum. The RECON™CB1™ is a collar-based high-density data logging tool that captures high-resolution data to provide the most accurate picture of the drilling environment to allow you to zoom in and see everything, including torque, weight-on-bit, and internal and external pressure.

SOFTWARE

All RECON devices come with their own tool configuration and instant report generation software.

READY TO TALK?